9325 Valcup for Validation of your Thermometers (Qty 1) 10830 KlxUV intensity: mW/cm2 Measurement Range

KlxUV intensity: mW/cm2 Measurement Range Illuminance: 0 lx to 130 KlxUV Intensity: 0 to 30 mW/cm2 Units of Cumulative Measurement Cumulative Illuminance: lxh

fitted with a 1m curly cable

One Time (Stop recording when capacity is full) Recording Start Method Immediate Start or Programmed Start (by individual logger or by group) Communication Interfaces USB Communication External Memory SD Memory Card

The N2000CRU Computer Docking Station is designed to work with the N2000 Diligence Series Data Loggers for syncing data between the device and your PC

If a UTRED30-16 /ST100 probe combination is calibrated to a higher level of accuracy (as is possible) then care should be taken to always use the same UTRED30-16/ST100 combination for measurements as the ST100 sensor is not rated interchangeable at accuracies better than the UTRED30-16/ST100 rating in this specification

9325 Valcup for Validation of your Thermometers (Qty 1) 10830 KlxUV intensity: mW/cm2 Measurement RangeUsing accurately calibrated thermometers is an essential component of an efficient HACCP workflow. Validate the accuracy of your thermometers with our easy to use VALCUP ice point temperature verification system! Simply follow the instructions printed on the back side of the cup to create the perfect ice bath. Just fill the insulated cup with crushed or shaved ice, add water as specified and validate your thermometer in a few simple steps. If your